THIS HAS AN 8MM RIGHT HAND THREADED MIRROR HOLE

THIS SWITCH WILL WORK ON THE FOLLOWING

WE WILL ADD TO THIS LIST AS WE VERIFY FITMENTS

CT90 K0 TO K4

_________________________________________________

INSTRUCTIONS FOR CT90 K0 TO K4:

BLUE TO BLUE ON BACK OF HEADLIGHT PIGTAIL (HIGH-BEAM)

WHITE TO WHITE ON BACK OF HEADLIGHT PIGTAIL (LOW-BEAM)

BROWN TO BROWN IN HEADLIGHT BUCKET (TAIL-LIGHT)

(BROWN WITH WHITE STRIPE NOT USED)

(CAREFUL ON THIS ONE !!) YELLOW FROM SWITCH WIRE TO BLACK IN HEADLIGHT BUCKET (HOT-WITH KEY ON TO POWER LIGHTS)

THEN THE INCLUDED SEPARATE PINK JUMPER MALE/MALE WIRE, TO THE YELLOW FEMALE AND THEN JUMPER THE OTHER END OF THE JUMPER WIRE TO THE plastic insulator covered terminal that is ALL WHITE OR WHITE WITH YELLOW BAND, , this is ALSO ALL INSIDE THE HEADLIGHT BUCKET.. this helps the charging circuit
 
The knob for the on and off switch on these tends to be cracked so we are sending a new/spare knob with each switch.  If you need another one they are our part number 303G and replacement levers are our S1077