1EA SET CT90 CT110 (VERY) HEAVY DUTY REAR SHOCK SET 3XSTOCK STIFFNESS (HDSHOCK)
 
CT90 CT110 (VERY!!) HEAVY DUTY REAR SHOCK SET  (HDSHOCK)
 
 
335MM EYE TO EYE
 
FOR USE WITH THE CT90K1 TO 1979 AND ALL CT110'S YOU MUST DO THE FOLLOWING:
 
USE NO INNER PLASTIC BUSHINGS IN THE TOP EYE OF SHOCKS JUST THE BIGGEST RUBBER BUSHING
 
AND NO INNER PLASTIC BUSHINGS IN THE LOWER EITHER JUST THE SMALLEST RUBBER BUSHING
 
THEN USE SOME COMMON FLAT WASHERS TO SPACE THE TOP RIGHT MUFFLER SIDE OUT SOME TO CLEAR THE MUFFLER. IF YOUR MUFFLER NEEDS IT GRAB THE BOTTOM AFTER BOLTED UP AND PULL OUT (:
 
 
THESE SHOCKS ARE ABOUT TWICE (maybe_more) THE SPRING STRENGTH AS THE STOCK SHOCKS. THEY ARE WIDER AT THE TOP THAN THE STOCK SHOCKS SO USE WASHERS TO MOVE THE MUFFLER FURTHER AWAY FROM THE RIGHT SHOCK.
 
THE TOP RUBBER BUSHING LIKES TO HAVE A LITTLE OIL ON IT TO HELP SLIP OVER THE STUD IT FITS OVER AS IT IS A NICE TIGHT FIT. THESE SHOCKS ALSO HAVE 5 SPRING SETTINGS AND A WRENCH SO WHEN YOUR PACKING ALL THAT GOLD OUT YOU CAN CRANK UP THE SPRINGS TO THE MAX :)
 
OR THE 40 POINT BUCK