*1EA NEW OEM HONDA CT110 HANDLEBARS WITH FRONT BLINKER MOUNTS (BUT-READ) (S1090)
 
WITH SWITCH MODS = Honda CT110 1980 TO 1986

THESE OEM HONDA BARS ARE ABOUT 28" LONG WITH 6.5" OF LIFT/TALL AND ARE 7/8" DIAMETER

THESE ARE FROM A NEWER VERSION OF AUSTRAILIAN POSTAL BIKE, BUT I DON'T SEE WHY THEY WON'T WORK FOR ANY CT110 AND PROBABLY A LOT OF THE CT90'S (K6_TO_1979) IF YOU USED THE NEWER CT110 TYPE BLINKERS ?

THE BIG DIFFERENCE IS THE SWITCH WIRES GO ON THE OUTSIDE OF THE BAR

(LIKE ALL NEWER HONDA BIKES ARE...)

INSTEAD OF ON THE INSIDE OF THE PIPE.

I USE A GRINDER BIT ON THE END OF A DRILL OR A DREMMEL TO MAKE A U GROOVE FOR THE WIRES TO COME OUT THE BOTTOM OF THE SWITCHES. (SEE SWITCH PICTURE'S YELLOW PART)

also IF YOUR OLD SWITCH HAS A GUIDE PEG, PULL IT OUT LIKE A BAD TOOTH (WIGGLE WITH PLYERS)