1EA NEW CARB CARBURETOR CT90K2 TO 1979 (19MMCT90)(S1136)
REF 16100-102-775 16100-102-702
FOR THE 1978 AND 1979 THIS IS NOT THE STOCK HONDA CARB, BUT IT IS AS CLOSE AS WE CAN FIND !!! SEE MEASUREMENTS BELOW AND SOME PICTURES OF AN OEM HONDA CARB FOR THESE YEAES (NOT INCLUDED)
THIS CARB WILL WORK GREAT ON AND IS JETTED FOR THE FOLLOWING MODELS
CT90'S 1970 (K2) THRU 1979
ATC90'S ALL YEARS 
MAIN JET #74 IDLE #38
THIS CARB IS A NEAR PERFECT FIT ON THE 1978 AND 1979 CT90'S
BUT !!!
IF YOU HAVE A K2 THRU 1977 CT90 YOU CAN USE THE CT110 CARB TO AIR BOX BOOT!!! LISTED ON ANOTHER LISTING
MAKE THE OLD BOOT WORK WITH A COUPLER OF SORTS? AS THIS CARB IS ABOUT 1/4" SHORTER AND 1/8" BIGGER REAR OD THAN THE K2-1977 CT90 STOCK CARBS.
OTHER 90CC MODELS LISTED MAY HAVE TO DO SOMETHING TO ADJUST FOR THE SHORTER CARB LENGTH.
===================================================
COMES WITH JETS INSTALLED !!
THIS CARB BOLTS RIGHT UP TO THE STOCK 1970 K2 THRU 1979 CT90 INTAKE MANIFOLD (48MM BOLT PATTERN)...
THIS CARB HAS THE 2 BARB FUEL SWITCH ON THE SAME SIDE AS THE ORIGINAL HONDA CARB'S HAD...
THIS CARB HAS THE CHOKE AND ADJUSTER SCREWS ON THE SAME SIDE AS THE ORIGINAL HONDA CARB'S HAD...
THIS CARB HAS AN ADJUSTABLE FLOAT AND A RUBBER TIPPED FLOAT NEEDLE, WHICH IS BETTER THAN MOST OEM CARBS
THIS CARB WILL ACCEPT AN OEM TYPE MAIN JET LIKE THE 1978 AND 79 CT90'S HAVE