1EA NEW QUALITY "SHENG_WEY" REPLACEMENT CARB (CT70 TO 1977) OTHERS
REF 16100-GN5-840
 
CT70 1969_KO_THRU_1977  "SHENG_WEY" REPLACEMENT CARB_READ 
 
 ALL YOU SHOULD NEED TO BE RUNNING LIKE NEW, AND NOT LEAKING GAS ALL OVER THE FLOOR
 
ISN'T THAT BETTER THAN FIGHTING THAT WORN OUT 30+ YEAR OLD CARB??
 
*MAIN JET #75 IDLE JET #40 BOLT PATTERN 48MM
 
SHOULD BE close FOR STOCK 1969 THRU 1977 CT70'S 
 
THE FUEL SWITCH BARB CAN POINT EITHER DIRECTION.
 
THIS "SHENG-WEY" CARB DOES COME WITH THE GOOD FUEL FILTER, SO INLINE FUEL FILTERS ARE not really NEEDED!!
 
THE FUEL HOOKUP/SWITCH AND CHOKE IS ON THE OPPOSITE SIDE THAN NORMAL BUT IT WILL NOT INTERFEAR WITH NORMAL OPERATION. WE HAVE SOLD A LOT OF THESE WITH GREAT REPORTS. 
 
MAIN JET #75 IDLE JET #40 VENTURA SIZE IS 18MM
 
NOTE!! THIS CARB COMES WITH A ONE FUEL BARB PETCOCK INSTALLED, SO IF YOU NEED A TWO BARB PETCOCK,YOU CAN PURCHASE THOSE ON OUR OTHER LISTING
 
sometimes the inner cable length on the stock cable may be a little bit too long for the aftermarket carbs and not allowing for a complete throttle slide lifting, so you may want to get a solder on cable end so you can shorten it 1/8" to 1/4" if needed... our number is (END) sold separately
 
THE LAST PICTURE SHOWS THE OPTIONAL 2 PRONG PETCOCK LISTED ON A DIFFERENT LISTING